This guide is designed to help you get up and running with ease. Whether you're a firsttime user or need a quick refresher, you'II find step-by-step instructions and essential tips to start using the product effectively.
In just a few steps, you'II be equipped with the knowledge to make the most of your experience.
Let's get started!
1. Handling the controller
How to interact within the simulation
How to interact with the equipment
2. Connecting the system
Attach the power cable to the case
1. Match the "Neutrik PowerCON" with the "Neutrik Inlet" on the Case.
2. Next push the Neutrik PowerCON into the case.
3. Twist the Neutrik PowerCON until you hear a click sound.
Plug the power cable into the outlet
3. Booting up the system
The system is now booting up, which may take up to 5 minutes to complete.
Verify the system power status
Verify the Wi-Fi status
4. Starting the application
Tap the "Academy Application" found on the middle of the screen.
The application is now booting up, which may take up to 2 minutes to complete.
5. Equipping the VR hardware
Powering on the VR headset
Press the power button on the side of the VR headset.
Adjusting the VR headset
Adjust the Elite Strap on the VR headset for a perfect fit.
Adjusting the Lens width
Adjusting the lenses of the VR headset for a clearer image.
Activating the controllers
Press any button to activate the controllers.
6. Setting up the boundary
Create
Press "Create new boundary" to create your training ground.
Floor Level
Touch the floor to set the floor level, then press confirm.
Drawing your training ground
Start drawing your space on the ground by using the trigger button on the controller,
Anydesk How to set up a remote connection Anydesk is a remote access application that allows users to connect to and control another device over the internet. It comes pre-installed on all Flashgroup Academy kits to facilitate technical support. Its ...
Academy Large (2025) Laptop: HP Probook 450 G10 Router: GL-X2000 (Spitz Plus) Touch Screen: Verbatim PMT-17 Academy Small (2025) Laptop: HP Probook 450 G10 Router: GL-X2000 (Spitz Plus) Touch Screen: Verbatim PMT-17 Meta Quest 3 Setting up guardian ...