When a filter is selected it will enable the icons on the map. These icons show the exact location of the selected interaction. 

 
When a location is selected a menu opens on the left side of the interface

Crowds are a group of people who will stand in the simulation and make background noise. There are 3 sizes available to choose from, this being small, medium and large. 

Doors used for blocking certain areas. The door has 2 options available: The door can be locked and requiring a piece of equipment to open or the door is unlocked. When the door is unlocked, a slider appears to select how far the door is opened on the start of the scenario. 

Fires in the scene provide a challenge for the users and something to extinguish in the scenario. The fire can be activated, and the user can select how far the fire has evolved when the scenario starts. There is also an option to select if the fire grows or stays the same. If fire growth is on, then it will continue to develop where if fire growth is turned off it will stay the same size. This is for when the user wants to create a containable fire.  

Hazards can be bottles of deodorant and other objects that need to be selected and removed from the simulation. These can be activated directly from the menu on the left.

NPC’s can be placed in the scene. They come in a wide variety of options they can either be an aggressor or a victim within the simulation.  

Aggressors are NPC’s that have intelligence and will give the trainees a hard time during the simulation. Requiring them to use some kind of deescalating actions to get them in order. The user can select a character to indicate how the NPC will look in the simulation. They can also select aggression and weapons. These two options determine how much the NPC will listen to the deescalating actions being taken by the users.  
 

They can also be selected as medical victims.  These require medical attention to help the victim. They come in intensity ranging from T1 begin heavy to T3 being minor injuries. These victims have predefined characters so there is no option to select how they look.  

The user can select a starting location within the scenario. Every scenario needs to have at least one starting location to work. If there is no starting location active the system will prompt the user when they try to save the scenario. 
 

When advanced setup is enabled, the user can split the trainees into different starting locations. This can be used for multi-disciplinary training where multiple teams come from different angles.

Vehicles hold the equipment that a trainee might need during the scenario. There are currently a wide range of vehicles available from American models to European models. 

Windows are available within the scenario creator to be configured. 

Windows can be locked or unlocked. Locked windows are closed when the scenario starts. but unlocked windows can be set to turn or tilt and how far they are already open. Most windows within the simulation are turned and tilted combined, and the trainee can switch between them by using the handle on the window. The angle determines the starting angle of the opened window.  

If the user wants to see the effect of the smoke on the angle of the windows, then place a fire in the room and open the windows. After that simulate the fire and see how the smoke evolves.